IRIS IRMA MATRIX Door Clear

12
/30
IRMA MATRIX Door Clear option | Mounting and operating instructions
released
Rev. 1.3
2018-08
3.2 Configuring Door Clear in the DC Configurator
Clicking on starts the DIST500-Door
ClearConfigurator.exe program.
Fig. 9: First start-up of the program with application note
Fig. 10: Change language
Program start-up
After opening the Door Clear configurator, please note
the instructions which appear in the main window:
“The door must be closed and the OBC disconnected to
define the Door Clear area. Please close all doors and
disconnect the OBC before proceeding.”
Then click WEITER (= continue).
Changing the language setting
If required, click on EXTRAS > SRPACHE ( = language) > and
choose the desired language.