IRIS IRMA MATRIX Door Clear

4
/30
IRMA MATRIX Door Clear option | Mounting and operating instructions
released
Rev. 1.3
2018-08
Fig. 12: Select sensor ................................................................................................................................ 13
Fig. 13: Confirm sensor selection with OK ......................................................................................... 14
Fig. 14: Left: currently set Door Clear zone ........................................................................................ 14
Fig. 15: View after applying DELETE ..................................................................................................... 15
Fig. 16: Door Clear zone .......................................................................................................................... 16
Fig. 17: Test run active, the sensor sets the “Door clear” status. ................................................. 17
Fig. 18: Test run active, the sensor sets the “Door not clear” status. ......................................... 17
Fig. 19: Exit Door Clear configurator ................................................................................................... 18
Fig. 20: “Door Clear” tab in the Config Tool ....................................................................................... 19
Fig. 21: Writing the configuration data into the sensor ................................................................ 20
1 General information
1.1 Symbols used / Abbreviations
“Please note” “Worth knowing”
“Caution - can lead to defects” “Information”
“See appendix!” “See document (on homepage)”
“Instructions for action” “Please record”
“Please consult iris-GmbH!” “Download”
Marked gray
Instruction manual (operating software)
This arrow indicates setting parameters which must be adjusted for each configuration!
Door Clear
configurator
Abbreviation used for “DIST500-Door ClearConfigurator” software
sCON-S /-F-12
sCON-F-12-PoE
sensor Connector –Standard / Flat – M12 connector
sensor Connector-Flat-M12-Power-over-Ethernet
SELECT SENSOR Function keys in the software