Iris Technology Operator's Manual
QuietPower 1800 (QP-1800) Doc 287.F701 / 100412
Page 9 of 56 Rev 12 APR 2010
CAUTION
Do not disassemble the QuietPower inverter. Only qualified electronics
maintenance technicians are permitted to replace the fuse. Attempts to
service the inverter by unqualified personnel may result in a risk of
electric shock or fire. Refer to section 7, warranty and service, for
instructions on servicing the inverter.
CAUTION
Do not use harsh or abrasive cleaners on the QuietPower inverter or
NATO cable. Do not use petroleum-based products of any kind. Damage
can result if these precautions are not followed. Use only a non-abrasive
cloth dampened with soap and water to clean inverter and NATO cable.
Do not attempt to flush the unit with liquids of any kind.
CAUTION
If you are installing the NATO Cable for the first time, install the red
terminal cover on the red lead and the black terminal cover on the black
lead.
To Next Page
Loading...
General