I A P 2 0 2 3 . 0 0 1 - A F M / I R I S T E X A N I I P A G E | 124
FOR SIMULATION USE ONLY – NOT A TRAINING AID
longitude value (a seven-digit number) when the
W2 selection is LONG, and the elevation value (a
number with up to five digits) when the W2
selection is ELEV.
Data can only be entered in this window using the
alphanumeric keyboard, and must be a valid
latitude or longitude, including leading and trailing
zeros (when the selection is LAT or LONG) or an
elevation between –32767 and 32767 feet (when
the selection is ELEV).
The latitude format is DDMMMM where DD is the
degrees and MMMM is the minutes of latitude with
two decimal places.
The longitude format is DDDMMMM where DDD is
the degrees and MMMM is the minutes of longitude
with two decimal places.
When entering the elevation, the value can be
toggled from positive to negative (or vice versa)
using the +/- key.
If no data has yet been entered in W4 for the
current waypoint and W2 selection, the text NO
DATA is displayed left justified.
To Next Page
Loading...