Irritrol MCPLUS Series User Manual

.
30
- CONTINUED
DISPLAYING CURRENT WATER
BUDGETING PERCENT
To display the current water budgeting percent without affecting the
program:
1. Turn dial to desired program.
2. Press the %/PM key.
Display will show water budgeting’s current value.
NOTE: 100% is normal when water budgeting is not in use.
EXAMPLE:
PROGRAM
.
1
Assume that water budgeting had previously
been set at
50% (see “Water Budgeting,”
.
.
page 32). To display this setting without
.
.
affecting the program, turn the dial to Program 1:
NOTE: For percentages other
than 100, in
position, a period will he displayed
the display.
Displaying Existing Settings
.
the respective program
in the lower right side of
USING ADVANCED
FEATURES
The MC$tcs controller offers several advanced features for sophisticated
watering applications. These include:
l Changing the length of the watering calendar
l Using water budgeting
l Programming a delay between stations
l Options
- Running a single program
- Changing watering time to seconds and minutes in Program 4
l Loop watering
l Setting watering time for all stations using one entry
CHANGING THE LENGTH OF THE
WATERING CALENDAR
To give you greater flexibility, the watering calendar may be changed
from its factory setting of 7 days. The calendar may
be from 1 to 16
days. This change affects all programs. This feature can be used to aid
in meeting watering restrictions or for ease in programming.
For simplicity of programming, you may want to shorten the watering
calendar. A watering calendar of 2 days, for instance, would water each
program every other day. Keep in mind that a 2-day watering calendar
uses only two days, i.e., day 1 and day 2.
A longer watering calendar may also be programmed. For example, to
water every 2 weeks, use a 14-day calendar.
To change the watering calendar:
1. Turn the dial to the Calendar/Program Erase position. The current
calendar length is displayed. For example,
PE:7 indicates a 7-day
weekly calendar.
2. Key in the desired calendar length (from 1 to 16).
3. Press the Enter key.
NOTE: The number entered for Set Today, Days On, and Days
Off
cannot be greater than the programmed calendar length.
Using Advanced Features
31

Irritrol MCPLUS Series Specifications

General

Brand	Irritrol
Model	MCPLUS Series
Category	Controller
Language	English