Irritrol Rain Dial-R

minutes. Perfect for new installations!
• Live programming – Enables programming changes to be made
at any time—even during watering!
• Fully automatic, semi-automatic and manual station operations.
• Manual Advance – Enables station sequence to be advanced man-
ually during operation (manual or automatic).
• Off or Stop – Immediately stops and prevents all watering activity
without disturbing Programs.
• Four places available to quickly remove start times – Four
“OFF” positions are provided within the time display to remove
unwanted start times; significantly reducing the amount of scrolling
required.
• Rain Delay – Enables automatic watering to be postponed from
1 to 9 days; then resume automatically watering as scheduled.
• Water Budget – Enables the run time of all stations within a
Program to be scaled up to 200% or down to 0% (Off). In addition,
a Water Budget value can be applied to individual Programs by spe-
cific months when seasonal water budgeting is preferred.
• MV/Pump control by station – Enables automatic Master Valve/
Pump operation to be controlled by individual stations.
• Station sequence delay – Provides an adjustable delay period
between stations during the operating sequence to accommodate
slow-closing valves or a required well-recovery period.
• MV/Pump control during station delay – Enables Master Valve/
Pump operation to be active or inactive during a station delay period.
— Rain Dial-R provides the choice!
• Built-in circuit protection – Helps protect the controller’s elec-
tronic components from damage due to power and nearby lightning
surges.
• Diagnostic Circuit Breaker – Enables the controller to detect and
bypass any station with a short circuit or faulty solenoid. Displays
“FUS” and the bypassed station number for easy troubleshooting.
• Clear Program Memory – Enables Program memory to be cleared
and reset independently of other Programs.
• Reset to Factory Program Defaults – Enables factory default
Program settings to be easily restored if required.
3