Iseki TXG23 - Hydraulics Specifications; Electrical System Specifications; Capacities; Tread Width Settings

79
TROUBLESHOOTING
SPECIFICATIONS
TXG23
HYDRAULICS:
Steering System; Type Hydrostatic (power)
Pump Transmission-mounted gear pump with flowdivider
Maximum Output 7.5 I/min.
Pressure 1209 psi (8339 rPa)
Main Hydraulic System; Pump Transmission-mounted gear pump
Maximum Output 23.1 I/min.
Pressure Relief valve setting 1920 psi (13244 kPa)
Rear Linkage; Type (4WD model) Three-point hitch
Size Category 1
Control Direct control
Lift Capacity (4WD model) 540 kg measured at ball ends
ELECTRIAL SYSTEM:
System Voltage 12 volt, negative (-) ground
Battery cca @ 0 F (-18) 390 cca
Charging 40 amp alternator with internal regulator / rectifier
CAPACITIES:
Engine Crankcase with Filter 2.6 liters
Transmission 11.0 liters
Fuel Tank 21.0 liters
Cooling system 4.6 liters
Front Drive Axle (4WD model) 4.0 liters
TREAD WIDTH SETTINGS:
Front 4WD
Ag.Tires 930 mm
Turf Tires 930 mm
Rear 4WD
Ag.Tires 840 mm
Turf Tires 840 mm
Front 2WD
Ag.Tires 930 mm
Turf Tires 930 mm
Rear 2WD
Ag.Tires 840 mm
Turf Tires 840 mm
MAXIMUM AXLE LOADING:
Front 4WD 650 kg
Front 2WD 500 kg
Rear Axle 750 kg