ISLA Instruments S2400 - Assigning Sounds to Tracks; Assign Sound; Load Kit; Load Sounds Folder

ISLA Instruments S2400 User Manual
– 19 –
AAssssiiggnniinngg SSoouunnddss ttoo TTrraacckkss
There are four ways to assign sounds to tracks.
Assign Sound
Press Shift+Pad, or select Track Settings from the Settings menu, then select Assign Sound. The
File Browser is displayed. Navigate to a folder containing WAV files. As you scroll over files, they
are previewed. Repeat the preview by pressing the pad. When pressing the pad, sounds will
preview using the track’s settings (pitch, envelope, etc.). Press Enter or click the encoder to
select a sound and assign it to the track.
If the sound being assigned is in a kit or project folder with a .KIT file that has the same name as
the folder, then the track settings will automatically be loaded from the kit file.
Track settings, and therefore the Assign Sound function, can also be accessed from the Organize
Tracks screen.
Load Kit
Select Load Kit from the File Menu. In the file browser, highlight a kit folder, and press Enter or
click the encoder to load the whole kit of sounds and their settings. As long as the KIT file has
the same name as the folder, there is no need to navigate into the folder. If the names do not
match, then clicking on a kit folder will open the folder, and highlighting the KIT file and pressing
enter or clicking the encoder will load it.
Load Sounds Folder
Select Load Sounds Folder from the File Menu. Navigate to a folder containing sounds. The
sounds will preview as you scroll over them. Highlight a WAV file and press Enter or click the
encoder. The sounds from the highlighted file down will be loaded. The sounds will load starting
at the last track with no sound assigned, and filling as many tracks as are empty. If track D8 has a
sound assigned, then the sounds are assigned to tracks starting at A1, overwriting what used to
be assigned to those tracks.
Browse Files
Select Browse Files from the File Menu. This mode shows all file types, not just WAVs. Navigate
to a folder containing sounds. To preview a sound, press Enter or click the encoder. Press a pad
to assign a sound to that track.