ISLA Instruments S2400 User Manual
– 62 –
SSeettttiinnggss
Display the Settings menu by pressing Shift+Settings (the 2nd key from the left in the top row).
Global Settings
MIDI-Only Banks
There are always four sample track banks. The number of MIDI-only banks can be set from zero
to four. Lowering the number of MID banks after editing the settings for a MIDI track, or
recording MIDI tracks into patterns, does not clear the settings, or remove the tracks from
patterns.
USB Mix Order
The USB Audio output consists of ten channels: eight channels corresponding to the eight S2400
outputs, and two mix out channels. The mix out channels can appear first or last.
Pad Threshold
The pad threshold is amount of pressure needed to play a sound. The setting goes from zero to
99. Set it to whatever level feels comfortable.
Dynamic Pads
When dynamic pads is turned on, the level that a sound is played or recorded is set by the
amount of pressure on the pad, not the level faders.
Dynamic Minimum %
The dynamic pads minimum level percent is the quietest a sound will be when using dynamic
pads.
Pitch Min/Max Octave
Sets the range for the pitch faders. Some people find six octaves to be too much or the extreme
pitch shifts to be not musically useful, so the range can be customized. Values can be from -3 to
-1 and from 1 to 3. This does not change the actual range of pitch shifting, or any pitch shifts
stored in patterns, only what is allowable via the faders.
Fader Catchup
When catchup is enabled, faders and knobs must be moved to the position of the current
parameter value before they have an effect on that value. When catchup is disabled, parameter
values will jump to the fader or knob position as soon as the control is moved.
Fader Lock @Start
When the S2400 is powered on, faders are either all locked or all unlocked. See the fader lock
section for more details on how locking works.
Load@Start
When the S2400 is powered on, it can load the last used kit, the last project, or nothing.
To Next Page
Loading...