ISLA Instruments S2400 - Record Features; Live Parameter Record Overwrite

ISLA Instruments S2400 User Manual
– 47 –
RReeccoorrdd FFeeaattuurreess
Live Parameter Record Overwrite
The filter, level, pitch, envelope, and loop/slice parameter values that are recorded into the
pattern can be selectively changed on the fly. The pattern is changed, and the new parameter
values are be saved with the pattern.
While recording (not in playback), go to the appropriate fader mode and press A to enable
overwrite, or press B to enable filter overwrite (in mix, level, or pitch mode). This setting is
separate from the Playback Parameter override setting. The button will be illuminated to
indicate that overwrite is active.
Live Parameter Record Overwrite operates similarly to the selectively live-erase events function.
While overwrite is enabled, pressing the pad will change the parameter values to the current
fader or knob values as the track is played in the pattern. In Multi Mode, each of the eight multi
parameters can be overwritten separately.
To change all events to the same parameter value, use the Modify Pattern function from the
parameter settings menu, or the Modify Pattern shortcut A+Pad (B+Pad for filter).