ISLA Instruments S2400 User Manual
– 66 –
FFiillee
Display the File menu by pressing Shift+File (the third key from the left in the top row).
Please read the Files and SD Card section before this section.
Rename Project
Prompts for the new name, then renames the existing project folder and the S24, KIT, and MAP
files. The project must have already been saved for this option to be visible.
New Project
Prompts for a project name, then clears all data from memory, creates the project folder and
creates default S24 and KIT files.
Load Project
Loads a project from the SD card. All data in memory is erased when before the selected project
is loaded.
Save Project
Saves any changes to a previously loaded or saved project. If the project has not yet been saved,
you will be prompted to name the new project. This option does the same thing as pressing the
Save key.
Save Project As
Saves the current project in a new folder with a new name. Loading a project, then selecting
Save Project As will make a copy of the project.
Delete Unused WAVs
Deletes WAV files from the project folder that are not assigned to tracks. The project must have
already been saved for this option to be visible.
Save Kit
If a kit was loaded or saved, and a project was not loaded or saved after that, then the Save Kit
menu option is available to save edits made to kit parameters. This option also copies any WAV
files to the folder that were assigned to tracks since the kit was last loaded or saved.
Save Kit As
The Save Kit As option creates a new folder, copies all WAV files that are assigned to tracks to
the new kit folder, and creates the KIT file of track settings in the new folder.
Load Kit
Load kit is discussed in the section on Assigning Sounds to Tracks.
Load Sounds Folder
Load sounds folder is discussed in the section on Assigning Sounds to Tracks.
To Next Page
Loading...