ISLA Instruments S2400 User Manual
– 63 –
Tap Tempo Avg
The number of taps of the Tap/Repeat key to average when setting the tempo.
Default Measures
The default number of measures in a pattern. Setting default measures changes the length of
empty patterns in the current project, new projects, and projects loaded from the SD card.
MultiOrder
When a sound is assigned to a track, the multi values are set to defaults. The defaults can either
go from lowest on pad 1 to highest on pad 8, or Classic (high to low).
More Popups
Popup messages are displayed on the screen to confirm various actions. Examples are: erase
track from pattern (Erase+Pad), modify pattern (A+Pad), reset parameters (Back+Pad), add
pattern to song (F2), all sounds off (Shift+Back). Those actions have no visual feedback other
than the popup.
Other functions do have visual feedback, such as a clear change on the screen, or a button LED
turning on or off. For example, pressing F9 to enable fader lock illuminates the F9 key. For that
type of function, the popup message is optional, and can be turned off by unchecking the More
Popups setting.
Blinkenpads
When a track is played, either manually or in a pattern, the corresponding pad can either blink
white, blink off, or not blink at all.
Tempo Blink
The tempo key blinks in time with the tempo. It is a sort of visual metronome. Blinking can be
turned off.
Sleep Time 0=off
Sleep time is the number of minutes of inactivity before the S2400 goes into sleep mode. Sleep
mode turns off the screen and all key LEDs, and displays an animation on the pad LEDs. When
sleep time is set to zero, the S2400 never sleeps. The S2400 will not enter sleep mode if a
pattern or song is playing.
Sleep Color
Sleep color sets the color of the sleep mode pad LED animation.
Sleep Speed
Sleep speed sets the speed of the sleep mode animation.
To Next Page
Loading...