ISLA Instruments S2400 User Manual
– 81 –
MIDI Tracks Input Focus
An external keyboard, MIDI controller, or computer can be connected to a port, and without
changing the MIDI channel, it can control any S2400 MIDI track on any channel.
Configure the control port and channel (in the Control Settings section of the Sync menu) to
match the controlling device.
Press the A button for a MIDI track and that track will have focus. The track with focus will
respond to any MIDI messages coming from the control port and channel, regardless of that
track’s configured ports and channels. Press the A button again to turn focus off.
Press Shift+A to set the focus to more than one track at a time. MIDI message will go to all tracks
with focus.
Note that if a MIDI track has the A button configured for some MDI function (not off), then that
track cannot receive focus.
To Next Page
Loading...