Iso-Tech IPS 3303D - Setup; Power Up and Initial Configuration

IPS X303 Series Instruction Manual
20
SETUP
This chapter describes how to properly power up and configure the IPS
X303 series before operation.
Power Up
Select AC voltage
Before powering up the power supply, select the AC
input voltage from the rear panel.
Connect AC power
cord
Connect the AC power cord to the rear panel socket.
Power On
Press the Power switch to turn on the power. The
display shows the initialization screen with the
model name (IPS 3303S shown), followed by the
last recalled settings.
POWER
Power Off
Press the Power switch again to turn off the power.
POWER