Iso-Tech IPS 3303D - Command List

IPS X303 Series Instruction Manual
42
Command List
 Detailed descriptions of each command start from the next page.
 The “HELP” command shows all the below commands and their meanings, except for the
HELP command itself.
ISET<X>:<NR2>
Sets the output current.
ISET<X>?
Returns the output current setting.
VSET<X>:<NR2>
Sets the output voltage.
VSET<X>?
Returns the output voltage setting.
IOUT<X>?
Returns the actual output current.
VOUT<X>?
Returns the actual output voltage.
TRACK<NR1>
Selects the operation mode.
BEEP<BOOLEAN>
Turn on or off the beep.
OUT<BOOLEAN>
Turn on or off the output.
STATUS?
Returns the IPS 3303D or IPS X303S status.
*IDN?
Returns the IPS 3303D or IPS X303S identification.
RCL<NR1>
Recalls a panel setting.
SAV<NR1>
Saves the panel setting.
HELP?
Shows the command list.
ERR?
Returns the instrument error messages.
BAUD<NR1>
Sets the baud rate.
LOCAL
Returns the instrument to local mode.