Iso-Tech IPS 3303D - Command Syntax; Command Format and Parameters

IPS X303 Series Instruction Manual
40
Command Syntax
Command format
ISET<X>:<NR2>NL
1 2 3 4 5
1: command header
2: output channel
3: separator
4: parameter
5: terminator(line feed)
Output channel
1 (CH1) or 2 (CH2)
Parameter
Type
Description
Example
<Boolean>
Boolean logic
0 (off), 1 (on)
<NR1>
integers
0, 1, 2, 3
<NR2>
decimal numbers
0.1, 3.14, 8.5
Terminator
Each command must end with a terminal character (new line code,
ASCII: 0x0A) and each query must end with a carriage return, ASCII:
0x0D.
Note
Commands are not case-sensitive.