Iso-Tech IPS 3303D - Panel Lock and Channel Switching

SETUP
23
Switch between channels
Panel operation
Switching between channels only applies to IPS
4303S.
CH1CH2CH4 CH3
Press the CH1/3 key to toggle between CH1 and
CH3. The active channel will be shown on the
channel indicator.
CH1/3
CH1 CH3
Press the CH2/4 key to toggle between CH2 and
CH4. The active channel will be shown on the
channel indicator.
BEEP
CH2/4
CH2CH4
Front Panel Lock
Panel operation
Press the LOCK key to lock the front panel key
operation. The key LED
UNLOCK
LOCK
UNLOCK
LOCK
turns on. To unlock, press the LOCK key for 2 seconds. The key LED
also turns off.
Note
The OUTPUT key is not affected by the lock
operation.
OUTPUT