Inspection and Installation
The rear panel shown in the figure is only an example. The actual appear-
ance of the rear panel is subject to the specific instrument.
Definition of RS232 Pins
The definition of RS232 pins are as follows.
When using the RS232 interface for communication, connect the pin 1, pin 2,
and pin 3 of the IT-E177 to the PC. The pin description is as follows:
Pins Description
1 TXD, transmit data
2 RXD, receive data
3 DGND, ground
RS232 Configuration
The user needs to configure the RS232 interface parameters in the system
menu before using the remote control. The RS232 interface parameters are as
follows.
Name Description
Baud rate Select the baud rate from the following options: 4800,
9600, 19200, 38400, 57600, 115200
Data Bit 8 (fixed)
Copyright © Itech Electronic Co., Ltd.
32
To Next Page
Loading...
Need help?
General
