Functions and Features
Pins Name Type Description
6 I-Monitor Analog
out
Current monitor signal.
7 +10V Analog
out
The +10V reference voltage output by
the power supply can be connected to a
resistance subdivision for analog control.
8 Vset Analog in The setting for the output voltage value
corresponds to Ch1 in the menu.
9 Iset Analog in The setting for the output current value
corresponds to Ch2 in the menu.
10 n.u _ not used
Analog quantity menu description
When the analog quantity function is optionally equipped, the system menu dis-
plays the analog quantity menu. The analog quantity menu items and parame-
ters are described below:
Ext-Program External analog function menu
On / Off Function switch:
• On: Turns on the external analog function.
In this state, the channel parameters can be
set.
• Off: Turns off the external analog function.
In this state, the channel parameters cannot
be set.
Ch1 Set the parameters of channel 1 (Vset).
Mx Indicates the slope factor of channel 1.
Mb Indicates the offset of channel 1.
Ch2 Set the parameters of channel 2 (Iset).
Mx Indicates the slope factor of channel 2.
Mb Indicates the offset of channel 2.
Copyright © Itech Electronic Co., Ltd.
63
To Next Page
Loading...
Need help?
General
