ITech IT8200 Series User Manual

Getting Started
Copyright ©ITECH Electronic Co., Ltd. 34
Single Phase Mode
The meter interface of IT8200 series instrument is shown as follow.
Three Phase Mode
The meter interface of IT8200 three phase mode is shown as follow.
The parameters are the same as the single phase.
Under three-phase mode, display total parameters corresponding to Phase A, B
and C, the user can switch screen and view the total parameters of each phase.
Introduction to Interface Symbols
The interface of IT8200 instrument will display the following symbols. All the
symbols and description are listed in the table below.
Char
Function description
Char
Function description
Single phase AC mode
Constant Voltage mode
Voltage setting&meter value
Frequency setting&meter value
Display area of measuring data
Status bar

ITech IT8200 Series Specifications

General

Brand	ITech
Model	IT8200 Series
Category	Measuring Instruments
Language	English