List Commands
Copyright © Itech Electronic Co., Ltd. 100
Parameters
1 to 65536 | MINimum | MAXimum
Examples
LIST:COUN 3
Query Syntax
[SOURce:]LIST:COUNt? [ MINimum | MAXimum ]
Returned Parameters
<NR3>
Related Commands
LIST:STEP
[SOURce:]LIST:STEP
This command sets the steps of the list.
Command Syntax
[SOURce:]LIST:STEP <NRf+>
Parameters
2 to 84 | MINimum | MAXimum
Examples
LIST:STEP 5
Query Syntax
[SOURce:]LIST:STEP? [ MINimum | MAXimum ]
Returned Parameters
<NR3>
Related Commands
LIST:LEV
[SOURce:]LIST:LEVel?
This command specifies the setting for each list step.
To Next Page
Loading...
Need help?
General
