ITech IT8700 Series - Trace:timer

TRACe Subsystem
Copyright © Itech Electronic Co., Ltd. 64
*RST Value
0
Examples
TRAC:DEL 1
Query Syntax
TRACe:DELay? [MINimum | MAXimum | DEFault]
Returned Parameters
<NR3>
TRACe:TIMer
This command is used to select the interval for timer.
Command Syntax
TRACe:TIMer <NRf>
Parameters
0.00002 to 3600s | MINimum | MAXimum | DEFault
Unit
S (second)
*RST Value
1
Examples
TRAC:TIM 0.1
Query Syntax
TRACe:TIMer? [MINimum | MAXimum | DEFault]
Returned Parameters
<NR3>