ITech IT8700 Series - Trace:filter; Trace:delay

TRACe Subsystem
Copyright © Itech Electronic Co., Ltd. 63
Query Syntax
TRACe:DATA?
Returned Parameters
{<NR3>}
TRACe:FILTer
This command is used to select whether the data in buffer is filtered data.
Command Syntax
TRACe:FILTer[:STATe] <BOOL>
Parameters
0 | 1 | ON | OFF
*RST Value
OFF
Examples
TRAC:FILT 1
Query Syntax
TRACe:FILTer[:STATe]?
Returned Parameters
<NR1>
TRACe:DELay
This command is used to select the delay time for trigger in buffer.
Command Syntax
TRACe:DELay <NRf>
Parameters
0 to 3600s | MINimum | MAXimum | DEFault
Unit
S (second)