ITRON SHARPFLOW SWB7 - ELECTRICAL CONNECTIONS; Electrical Safety and Grounding

3 ELECTRICAL CONNECTIONS
20
SHARPFLOW SWB7 + CWB7
www.itron.com WA-0092.0-EN-qs-06.13
3.1 Safety instructions
3.2 Grounding
DANGER!
All work on the electrical connections may only be carried out with the power disconnected. Take
note of the voltage data on the nameplate!
DANGER!
Observe the national regulations for electrical installations!
WARNING!
Observe without fail the local occupational health and safety regulations. Any work done on the
electrical components of the measuring device may only be carried out by properly trained
specialists.
INFORMATION!
Look at the device nameplate to ensure that the device is delivered according to your order.
Check for the correct supply voltage printed on the nameplate.
Figure 3-1: Grounding
INFORMATION!
Grounding without grounding rings. The flow sensor is equipped with a reference electrode.