ITS Telecom Pancode VoIP - Introduction to Pancode and Pantel VoIP

Pancode VoIP/Pantel VoIP Access Control Door Phones
Installation and Programming Manual
1. Introduction
This guide provides installation and programming instructions for the following products:
Pancode VoIP outdoor piezo keypad unit
Pantel VoIP outdoor piezo keypad unit
The Pancode VoIP and Pantel VoIP are smart wall-mounted and flush-mounted access control door phones
connected to a local Voice Over IP (VoIP) network of a VoIP PBX, allowing door entry control. They are available
for outdoor installation in an aluminum unit with a piezo keypad.
The Pancode VoIP and Pantel VoIP have the following features:
Feature Pancode VoIP Pantel VoIP
Integration with local LAN and VoIP networks
U U
Authorized registration with existing VoIP switching system (Proxy)
U U
Two different operation modes:
Standard – for direct dialing to any destination number
Speed-dial – for one-touch dialing to internal or external subscribers
U
X
Automatic busy & disconnect detection
U U
Door opening from any extension
U U
Door opening from Bypass Switch button
U U
Programmable day and night destinations
U U
High quality speakerphone with separate volume control
U U
Entry access code (supports up to ten codes)
U
X
Works in conjunction with card readers and security devices
U U
Programming via Ethernet interface using a web-based GUI application
U U
Acoustic echo canceller
U U
Automatic gain control (AGC)
U U
SRTP (encryption and authentication)
U U
Support for analog video (optional)
U U
Support for video over IP (MPEG 4) (optional)
U U
Internal network switch
U U
Smart looking durable design
U U
Software upgrade
U U
2