ITS Telecom Pancode VoIP - Firmware and Software Upgrade Procedure; Firmware;Software Upgrade Procedure Steps

Pancode VoIP/Pantel VoIP Access Control Door Phones
Installation and Programming Manual
6. Firmware/Software Upgrade
Only a firmware file provided by an authorized ITS Company representative can be used for the IP Door unit
software upgrade procedure. The firmware upgrading procedure requires TFTP client software, such as
"tftpd32" software.
6.1 Firmware/Software Upgrade Procedure
To upgrade the IP Door unit firmware/software, perform the steps as follows:
a. Establish a connection session with the destination IP Door device by through the PC Web-browser.
b. Check the current software version.
Figure 6-1. Software Upgrade Interface
c. Enter your PC IP address into TFTP Server IP address field.
d. Enter IP Door unit firmware *.img file name into Firmware file name field.
e. Click Submit Æ Reboot and re-establish a connection session.
f. Run the tftpd32 application, where you must to specify the firmware file storage directory in the Current
Directory field.
g. In to the IP Door unit GUI click Upload Firmware. Tftpd32 application screen shows the firmware upgrade
status. Connection session with the IP Door unit is interrupted and device is restarted.
42