Need help?Do you have a question about the ITS Telecom Pancode and is the answer not in the manual?
Step-by-step guide for measuring, drilling, and attaching the wall mounting bracket for the units.
General instructions for installing the PanCam unit, including power connection and camera activation.
Details the power connection (9V DC) and activation method for the PanCam camera.
Illustrates the wiring schematic for connecting the PanCam unit to a PBX, door lock, and TV monitor.
Explains how Pantel/Pancode can be installed individually or with access control devices.
Detailed steps for wiring the Pantel/Pancode unit, including power, PBX, and door-lock connections.
Explains how to connect an external access control device to trigger the Pantel/Pancode's door lock relay.
Details wiring for when the Pantel/Pancode triggers an external access control device.
Presents wiring options for Pantel/Pancode, including connections for external devices and door lock relays.
Explains how to set the Day/Night mode for destination number selection when the Call button is pressed.
Guides the user on how to access the programming mode using touch-tone commands and a password.
Details the procedures for resetting the unit to default factory settings for both standard and speed-dial modes.
Instructions to set the PanCam-C/Pancode to either Standard or Speed-Dial mode via programming.
Guides on how to change the password for accessing the unit's programming functions.
General| Brand | ITS Telecom |
|---|---|
| Model | Pancode |
| Category | Intercom System |
| Language | English |
To Next Page
