Introduction
PanCam/Pantel/Pancode
Installation and Programming Manual
3
The front panel of the PanCam
-
T unit incorporates a speaker,
microphone, and Call button. The PanCam
-
C unit also features
a keypad. The front panel is attached to the wall using a
bracket and screws.
The PanCam units ar
e hardwired units powered by an external
12V AC transformer, which is provided in the package.
Optionally, you may use a 12
-
24V DC adapter.
1.2 Pantel
The Pantel is a wall mounted access control door phone, which
is connected to an analog port of a PBX or a K
ey Telephone
System. The Pantel is compatible with most known telephone
systems and PBX types.
With the press of a button, the Pantel dials a pre
-
defined
extension number of up to 20 digits, allowing a conversation
to take place and then enables the dialed
party to open the door
for the caller by pressing touch tone digit(s).
The Pantel is available in either an aluminum unit for outdoor
installation, which is weather and vandal resistant, or a plastic
unit for indoor installation.
1.2.1
Features
The outdoor and
indoor Pantel units have the following
features:
Dialing to a pre
-
defined extension/subscriber
Door opening from any extension
Programmable day and night destinations
Automatic Busy & Disconnect Cadence Detection
(outdoor unit only)
Designed for wall mount
ing
Works in conjunction with card readers and security
devices
Hands free intercom
Simple to operate and program
Outdoor or indoor installation
To Next Page
Loading...
