ITS Telecom Pancode - Physical Description; Pancode; Features

Introduction
4 PanCam/Pantel/Pancode Installation and Programming Manual
1.2.2 Physical Description
Indoor Unit
Outdoor Unit
Figure 1 - 2. Pantel Front Panel
The front panel of the Pantel unit incorporates a speaker,
microphone, and Call button. The front panel is attached to the
wall using a bracket and screws.
The Pantel unit i s a hardwired unit powered by an external
12V AC transformer, which is provided in the package.
Optionally, you may use a 12 - 24V DC adapter. (For outdoor
unit only.)
1.3 Pancode
The Pancode is a smart wall mounted access control door
phone that is connected to an analog port of a PBX or a Key
Telephone System, allowing door entry control.
The Pancode is available in either an aluminum unit for
outdoor installation, which is weather and vandal resistant, or
a plastic unit for indoor installation.
1.3.1 Features
The ou tdoor and indoor Pancode units have the following
features:
Direct dialing to any extension
Entry access code
Speed - dial to internal or external subscribers
Automatic Busy & Disconnect Cadence Detection
(outdoor unit only)
Speaker
Microphone
Call
button