PanCam/Pantel/Pancode
Installation and Programming Manual
1
1
Introduction
ITS offers a wide range of Access Control Door Phones for
indoor and outdoor entry control. These solutions range from
the simplest one button unit to the most sophisticated unit with
a full keypa
d and built
-
in camera to monitor visitors at the
entrance. All of ITS’s Access Control Door Phones
incorporate cutting edge technology providing a high quality
speakerphone and a built in electric lock control. All ITS’s
Access Control Door Phones are easy
to set
-
up, modern and
durable in design and provide “plug and play” installation.
This guide provides installation and programming instructions
for the following products:
PanCam Outdoor unit
Pantel Outdoor unit
Pantel Indoor unit
Pancode Outdoor unit
Pa
ncode Indoor unit
1.1
PanCam
The PanCam unit is available in two versions: PanCam
-
C
(with keypad) and PanCam
-
T (one button). Both are wall
mounted access control door phones, connected to an analog
port of a PBX or a Key Telephone System, with an internal
blac
k & white or color high
-
quality pinhole camera encased
within the unit. It is also possible to connect an external
camera. Both, PanCam
-
C and T, are compatible with most
known telephone systems and PBX types.
1.1.1
General Features
The PanCam controls the camera
, providing four different
modes of operation:
Always on
Always off
Powered by pressing any button
Powered by pressing the call button
1.1.2
PanCam
-C Features
The outdoor PanCam
-
C unit has the following features:
Direct dialing to any extension
Speed
-
dial to int
ernal or external subscribers
Automatic Busy & Disconnect Cadence Detection
Door opening from any extension
Programmable day and night destinations
To Next Page
Loading...
