EasyManua.ls Logo

ITW Orbitalum ORBIMAT 165 CA - Technical Specifications

ITW Orbitalum ORBIMAT 165 CA
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical specifications ORBIMAT CA | Operating instructions
18
orbitalum tools GmbH, D-78224 Singen, www.orbitalum.com, Tel. +49 (0) 77 31 792-0 (09.03.15) OW_ORBIMAT_CA_BA_871060202_04_EN
5. TECHNICAL SPECIFICATIONS
Parameter Unit OM 165 CA OM 300 CA Remarks
Weld system type Welding rectifier (inverter)
Input (mains)
Mains system 1 phase + PE 3 phase + PE
Mains input voltage [V (AV)] 90 - 260 400
Permissible voltage tolerance [%] see mains input voltage +/–15 OM 165 CA Wide Range
Mains frequency [Hz] 50 - 60 50 - 60
Continuous input current [A (AC)] 14 (on 230 V) 13
Continuous input [kVA] 3.2 (on 230 V) 9
Current consumption, max. [A (AC)] 19 (on 230 V) 20
Connection value, max. [kVA] 4.4 13.5
Mains fuse [A] 16 20 Slow-blow characteristic
Power factor [cos ϕ] 0.99 (with 100 A) 0.7 (with 200 A) OM 165 CA: PFC
Output (welding circuit)
Setting range Weld current [A (DC)] 2 - 165 5 - 300 In 0.1 A increments
Weld current reproducibility [%] +/– 0.5 +/– 0.5
Rated current at 100 % ED [A (DC)] 120 220
Rated current at 60 % ED [A (DC)] 260
Rated current at 40 % ED [A (DC)] 300
Rated current at 30 % ED [A (DC)] 165
Weld voltage, min. [V (DC)] 10 10
Weld voltage, max. [V (DC)] 16 22
Open-circuit voltage, max. [V (DC)] 85 86
Cable diameter, min. [mm
2
] 16 35
Ignition power, max. [Joule] 0.9 0.9
Ignition voltage, max. [kV] 8 8
Output (control)
Rotation motor voltage, max. [V (DC)] 24 24 PWM signal
Wire feeding motor voltage, max. [V (DC)] 24 24 PWM signal
Rotation motor current, max. [A (DC)] 1.5 1.5
Wire feeding motor current, max. [A (DC)] 1.5 1.5
Rotation tacho voltage [V (DC)] 0 - 10 0 - 10 Rotation speed, actual
value
Other
Protection type IP 21 IP 21
Cooling type AF AF
Insulation class F F
Dimensions (wxdxh) [mm]
[inch]
540 x 420 x 290
21.3 x 16.5 x 11.4
540 x 420 x 440
21.3 x 16.5 x 17.3
300 CA without cooling
unit
Weight [kg]
[lbs]
26
57.3
34
75
Gas input pressure [bar] 3 - 10 3 - 10 Via pressure reducer
Recommended gas input pressure [bar] 4 4 Via pressure reducer
Cooling water volume [l] 2.3 CA 165 only
Water pressure, max. [bar] 2.5 CA 165 only
Sound level, max. [dB (A)] 84 84 IP 21

Table of Contents

Related product manuals