ORBIMAT CA | Operating instructions Initial operation
(09.03.15) OW_ORBIMAT_CA_BA_871060202_04_EN orbitalum tools GmbH, D-78224 Singen, www.orbitalum.com, Tel. +49 (0) 77 31 792-0 19
6. INITIAL OPERATION
6.1 Checking the parts of delivery
X Check delivery for completeness and damage caused by transport.
X Report any missing parts or damage caused by transport to your supplier immediately.
6.2 Included with the machine
Subject to modifications.
• 1 Orbital welding power source of the ORBIMAT CA series
• 1 Hose connection set ORBIMAT (Code 875 030 018)
• 1 Dummy plug for insertion into the connection of the remote control if no external remote control will be used
(Code 875 050 006)
• 1 Bottle with 2 litre (67.6 fl oz) of coolant OCL-15 (Code 875 030 015) (only with 165 CA)
• 1 Filling funnel (Code 875 030 014)
• 1 External operating keyboard (Code 875 012 075)
• 2 Keys for key switch (for subsequent ordering of one key: Code 875 012 058)
• 1 Operating instructions
• 1 QuickStart guide
To Next Page
Loading...