36
Activation
▪ To activate the device, press the (5) button
▪ If the driver presses the (5) button for the first time for ACC (the same applies for button (3) for CC), then the symbol
shown on the display will be white without speed.
▪ Only after the speed is set will the symbol (set by the system) and driving speed be displayed.
To deactivate, press the (5) or (3) buttons.
Setting the desired speed
The device can be set to a speed between 30 km/h and the maximum available vehicle speed. When the vehicle reaches the
desired speed, press the (2) SET + or (4) SET – button to set the vehicle to the current speed.
No specific activation of the gas pedal is required for setting.
Once a cruising speed has been set, the ACC is active.
Returning to speed
▪ After the system has been reset, but not deactivated, simply press the (3) RES button to return to the previously set speed.
ADAPTIVE CRUISE CONTROL- ACC
To Next Page
Loading...
