37
The system cannot be adjusted:
▪ When the brake pedal is pressed.
▪ When the brakes are overheated.
▪ When the hand brake is activated.
▪ When the shifter is in R position (reverse), neutral, or 1 (first gear engaged) (versions with manual transmission).
▪ When the clutch has been activated (versions with manual transmission).
▪ When the engine speed exceeds the maximum threshold
▪ Etc. (For further information, please see the operating manual)
Automatic activation of CC and ACC
If the CC is active (green CC symbol and target speed set) and the driver requests activation of the ACC by pressing the (5)
button, the ACC system will be activated directly, import the target speed, and load the distance with the standard value. The
driver will see the green symbol for the ACC with standard distance and the set speed.
ADAPTIVE CRUISE CONTROL- ACC
NOTE: The speed can only be recalled if the previously set speed was reset → white symbol).
To Next Page
Loading...
