SAFETY
Model 3000T Operation Manual 7
Description of Symbols Used
Attention, consult ACCOMPANYING DOCUMENTS before attempting to change
power supply selection or carry out interconnections. Equipment connected should
comply with IEC-60601-1 or IEC-950 with configuration to IEC-60601-1-1.
Type CF applied part, Defibrillator proof.
Fuse type/rating. Output signal.
_______
ON Input signal.
Stand By (STBY)
Alternate Current (AC)
Protective earth (ground) Input/Output signal
WEEE Compliance
Manufacturer
Caution - Electric shock hazard. Do not remove covers or panels. Refer service to
qualified service personnel.
Equipotential ground connector adjacent to this symbol.