Ivy Biomedical Systems 3000T User Manual

ECG MONITORING
20 Model 3000T Operation Manual
Patient Connections
To ensure compliance with safety and performance specifications, use the patient cables supplied by Ivy Biomedical
Systems (see Accessories). Other cables might not produce reliable results.
Use only high quality silver/silver-chloride short term monitoring ECG electrodes such as Ivy part number: 590342.
Use only high quality silver/silver-chloride ECG Electrodes or equivalent. For best ECG performance, use ECG
Electrodes supplied by Ivy Biomedical Systems (see Accessories).
Use the following procedure for ECG monitoring:
1. Prepare each electrode site and apply the electrodes.
2. Connect the patient cable to the monitor's front panel ECG input.
3. Connect the leads to the patient cable.
4. Attach the leads to the electrodes.
5. Use the procedures described in the following sections for alarm limit settings, lead selection, amplitude
adjustment, and enabling or disabling the filter. See the menu diagram below.
(white/red)
(black/yellow)
(red/green)

Ivy Biomedical Systems 3000T Specifications

General

Brand	Ivy Biomedical Systems
Model	3000T
Category	Medical Equipment
Language	English