1
1. INTRODUCTION 3
2. OPERATING THE JA-10 SYSTEM 3
2.1 KEYPAD CODE AUTHORIZATION 5
2.2 USING THE SYSTEM KEYPAD 6
2.2.1 ALARM SETTING 9
2.2.2 ALARM UNSETTING 9
2.2.3 PARTIAL ALARM SETTING
10
2.2.4 DURESS ACCESS CONTROL 11
2.2.5 TERMINATING A TRIGGERED ALARM 11
2.2.6 SECTION CONTROL BY AUTHORIZATION 12
2.2.7 SECTION CONTROL FROM THE KEYPAD’S MENU 12
2.3 OPERATING THE CONTROL PANEL WITH A KEYFOB 12
2.4 OPERATING THE CONTROL PANEL USING THE MyJABLOTRON SMARTPHONE APP 13
2.5 OPERATING THE CONTROL PANEL BY SMS 13
2.6 OPERATING THE CONTROL PANEL USING THE VOICE MENU 13
2.7 PG OUTPUTS CONTROL 14
2.7.1 KEYPAD FUNCTION BUTTONS 14
2.7.2 USER KEYPAD AUTHORIZATION 14
2.7.3 REMOTE CONTROL 14
2.7.4 DIALLING-IN 14
2.7.5 SMS MESSAGE 14
2.7.6 MyJABLOTRON 14
3. BLOCKING IN THE SYSTEM 15
3.1 BLOCKING USERS 15
3.2 BLOCKING DETECTORS 15
4. CONTROL PANEL USER SETTINGS 15
4.1 CHANGING USER ACCESS CODE 15
4.2 CHANGING, DELETING OR ADDING AN RFID TAG 18
4.3 CHANGING A PHONE NUMBER 19
4.4 ADDING/ DELETING A USER 16
5. EVENT HISTORY 16
5.1 USING THE LCD KEYPAD 16
5.2 LOGGING INTO MYJABLOTRON (THE SMARTPHONE APP) 16
TABLE OF CONTENTS
To Next Page
Loading...
