JAC J2 User Manual



Maintenance Manual for J2 Sedan
Electrical Part of Engine
147
3) Assemblage
When assembling the starter, the bearing, the gear and the friction surface should be lubricated by
adding high temperature grease. And then conduct the following operations.
Gear clearance adjustment
①

■ Push the
pinion out
with the
magnetic switch
energized, meanwhile check the clearance
between the pinion and the thrust piece with a
feeler.
■
If th
e
clearan
ce is out
of
range, adjust
by
using spacer.
Fig. 3.2.015
Fig. 3.2.016
Adjusting gas
ket

Stop block

Gear clearance
Pinion

JAC J2 Specifications

General

Brand	JAC
Model	J2
Category	Automobile
Language	English