Maintenance Manual for J2 Sedan
Electronic Control System
189
Theory of Hall sensor: When a current IS flows
through a semi-conductor chip, one Hall voltage is
generated in the right-hand direction of the
current, of which the voltage UH is in proportion
to the magnetic field induction B (perpendicular to
the current IS) and the current IS. The Hall voltage
is subject to the varying magnetic field induction
Operating temperature: -40
～
150
℃
It’s installed in the vicinity of the camshaft.
3.
Pin 42: Sensor signal
Pin 18: 5V power supply
Fig. 4.3.012
To Next Page
Loading...
Need help?
General
