JAC J2 - Page 28



Maintenance Manual for J2 Sedan
Service
26
■ Rock
each
wheel
to chec
k f
or proper
clearance.
■
Inspect
operation
conditions
of
wheel
bearings.
■
Check
axle, sus
pension
nut a
nd bolt
for loos
ening.
■
Check
shock
absorber
for oil
leak
or other
damages.
■ Check the suspension ball joint
for grease lea
kage;
check ball joint dust boot for
crack or other
damage
s.
15. Inspection of Drive Shaft
Check dust boot and drive shaft for any crack, worn,
damage or grease leakage.
16.
Lubricating Doo
r Lock, Hinge and Engine Hood Lock Pin
Lubricating Points of Door Lock, Hinge and Engine Hood Lock Pin
Fig. 2.2.023
Fig. 2.2.024
Fig. 2.2.025