JAC J2 User Manual



Maintenance Manual for J2 Sedan
Mechanical Part of Engine
42
■
Before starting engine,
check
oil
and fluid levels (including engine
oil
and coolant). Refill
to
specified level as required..
■ Check for fuel leakage
with
following
steps
：

-
With
ignition switch
turned to
the
“ON”
position, check
whether there
is
fuel
leakage
at
the
connecting positions.
-
With
engine
started,
recheck
whether
there
is
fuel
leakage
at
the
connecting
positions during
engine
increasing.
■
During
running of engine, check for any abnormal
noise
and/or
vibration.
■ With engine warmed up, verify that
there are
no leakage
of fuel,
exhaust gas
or other
oil and liquid
(including engine coolant and oil).
■
Bleed
air
and
replenish
by us
ing
specified
ports
and
hoses.
■
After engine
cooled down, recheck oil and liquid levels (including engine
oil and
coolant). If
necessary, refill them to the specified levels.
2)
General
of
Check
Items
List of Leakage Check Items
Item
Before
Startup
During
Engine
Operation
After Engine
Stopped
Engine
coolant
Level Leakage
Level
Engine
oil Level
Leakage Level
Transmission
oil,
brake
fluid,
and
clutch
fluid
Level
Leakage
Level
Fuel
Leakage
Leakage
Leakage
Exhaust
—
Leakage
—

JAC J2 Specifications

General

Brand	JAC
Model	J2
Category	Automobile
Language	English