Jackson Systems T-32-TS Installation Manual

INSTALLER SETUP MENU
SELECTING THIRD STAGE HEATING DIFFERENTIAL OPTION
Menu 13 is used to adjust the third stage heating differential. Only displayed
when SW1 and SW 3 are ON. The factory default is ( 2°F). This represents2
the temperature below the second stage heating differential when third stage
heat is energized. Touch the or arrows to change the differential.UP DOWN
Adjustable from 1 - 10°F in 1° increments
E
Back
Next
34

Jackson Systems T-32-TS Specifications

General

Brand	Jackson Systems
Model	T-32-TS
Category	Thermostat
Language	English