INSTALLER SETUP MENU
SELECTING DEMAND STAGING OR LOCKED STAGING OPTION
Menu 14 is used to select how the thermostat will stage the equipment. The factory
default is which = . Demand Staging allows the thermostat to0 Demand Staging
upstage or downstage the equipment based on the stage differential settings. In dual
fuel setup, the thermostat will not downstage to compressor if fossil fuel is energized.
1 Locked Staging= . Locked Staging allows the thermostat to upstage the
equipment based on the stage differential settings but locks in each stage until the
setpoint is reached. (No down-staging)
0 = Demand Staging (Factory Default)
1 = Locked Staging
E
Back
Next
35
To Next Page
Loading...
Need help?
General
