13
07610-004-04-18-R
OPERATING INSTRUCTIONS
OPERATION
6. Verify the nozzles and arms are free from obstruction. If clogged, remove end-
caps, clean nozzles with a brush, and flush with fresh water.
7. Replace end-caps and ensure they have been tightened.
8. Spray or wipe out interior of machine.
9. Replace wash and rinse arms.
10. Replace the strainers and strainer frame and ensure they are laying flat.
11. Use stainless steel polish to clean and protect outside of dishmachine.
SHUTDOWN AND
CLEANING
To Next Page
Loading...
