12
07610-004-04-18-R
Based on use, the strainers might become clogged with soil and debris as the
workday progresses. Operators should regularly inspect the strainers to ensure they
have not become clogged. Clogged strainers will reduce the washing capability of
the machine. Instruct operators to clean out the strainers at regular intervals or as
required by workload.
1. Open the door and remove the standpipe.
2. Close the door and turn the unit off by pushing the “Power” button.
3. The drain pump will activate and empty the unit of water.
4. When draining stops, remove and clean the strainers and strainer frame and set
aside.
5. Unscrew the wash and rinse arms from their manifolds.
OPERATIONAL
INSPECTION
SHUTDOWN AND
CLEANING
OPERATING INSTRUCTIONS
OPERATION
To Next Page
Loading...
