(II)
JWL 3
General Features
Auto shut off, built-in rechargeable batteries or AC alternative
Multiple functions: tare, preset tare, simple counting, check weighing, accumulation and
display for every deal.
Large bright backlit LCD with prominent 29mm high digits and LED backlight
Software filtering design and adjustable weighing displaying speed according to different
environments.
Easy operation with big keys and high weighing resolution
Single point calibration and linear calibration available
RS-232 serial communication interface(PC, printer, relay)
4-2 Display
4-2-1 LCD Display
Low battery indication
Tare or Preset Tare Indication
Center of Zero Indication, The zeroing range is ±2 ﹪of weighing capacity.
Auxiliary display (parameter, accumulated number of weighments)
TARE Symbol “ ” points at “TARE” when manual Tare action is done.
Preset Tare Symbol “ ” points at “Preset Tare” when preset tare value is set.
“NET” Net weight--Gross weight minus Tare. Symbol “ ” points at “NET” when manual
Tare or preset are actions are done.
“UW” Under simple counting mode, Symbol “ ” points at “UW” when unit weight is lower
than 4/5 of scale division. Unit weight is too small for ensuring accurate quantity calculations.
Charge Lamp
Red--- battery is charging
Green---battery is fully charged
HI lamp ON The weight on the weighing pan is greater than the upper limit.
To Next Page
Loading...
