J&M 620 - Auger Assembly; Lower Auger Component Identification

23
Description Part No.
1 Drive Dog Weldment, 1-3/4” ID (16”) (DDW-214) JM0024412
2 1-3/4” ID Bronze Bushing (2” OD x 1” Length) (EB-134) JM0002244
3 Hanger Bushing Assembly for 14” Diameter Auger 525-14W, 620-14 (HBA-500-F) JM0024421
4 5/8”-11 Gr5 Z Nylon Locking Hex Nut JM0008428
5 S-Cap Yellow - 1/2” ID x 1-1/4” x 21/32” (REC-1) JM0016842
6 14” Bottom Auger Flighting Weldment LF- 14- 119-5/8” JM0024474
7 5/8”-11 x 4-1/2” Gr5 Z Hex Bolt JM0020316
8 Lower Auger Liner for 14” Diameter Auger Cart (LAL-14) JM0026478
9 3/8”-16 x 1” Gr8 Z Hex Bolt JM0001485
10 3/8” ID, 1” OD Z Flat Washer JM0003061
11 Gate Indicator (1/2” Rod with Arrow) (525,620) (GI-12) JM0026486
12 3/8”-16 Gr5 Z SF Hex Nut JM0002152
13 3/8”-16 x 1” Gr5 Z SF Hex Bolt JM0002092
14 1” x 3” Clevis Pin with Cotter Pins JM0019407
15 Auger Gate Cover for 14” Diameter Cart (AGC-500-F) JM0017602
16 Spline Coupler 2-7/16” x 2-3/8” OD x 1-3/8” ID (14” & 16” Flighting) JM0057888
8
6
4
9
10
7
2
3
5
1
15131211 14
16
Lower Auger Assembly