Jandy APURE35 - System Description; Product Specifications

Page 8
Section 2. System Description
Figure 1. Example of Installation
2.1 Product Specications
Maximum Operating Pressure: 50psi Input Current @ 240 VAC: ~1 A
Input Current @ 120 VAC: ~1.3 A
Minimum Flow Rate: 40gpm
Maximum Flow Rate: 92gpm Input Freq: 47~63Hz
Required Salt Level: 4,000ppm(4.0gpl) Output Voltage: 25VDC(max)
Maximum water volume treated:
APURE35-35,000gal.(132,000L)
Output Current (adjustable by switch):
APURE35 - 5ADC
Chlorine Output:
APURE35 - 0.62oz.(17.5g)perhour
Dimensions:
Power Pack (L x W x H):10in.x4.5in.x13in.
Electrolytic Cell (L x W x H):6.5in.x5.5in.x12in.
Input Voltages: 240Vor120V
(thesystem
auto-detectsvoltage)
Weight:
Power Pack:7lbs.
Electrolytic Cell:2lbs.
The cell must be installed as the
last piece of equipment in the
circulation plumbing system just
before the pool
Cell
Heater
Pump
To common
power source
Power Pack
Filter
Pool Intake Spa Intake
Spa ReturnPool Return