Page 3
ENGLISH
Jandy
®
Pro Series JE Heat Pumps
|
Installation and Operation Manual
The U.S. Consumer Product Safety Commission
warns that elevated water temperature can
be hazardous. Consult heater operation and
installation instructions for water temperature
guidelines before setting temperature.
The following “Safety Rules for Hot Tubs,”
recommended by the U.S. Consumer Product
Safety Commission, should be observed when
using the spa.
Spa or hot tub water temperature should never
exceed 104°F (40°C). One hundred degrees
Fahrenheit (100°F [38°C]) is considered safe for
a healthy adult. Special caution is recommended
for young children.
The drinking of alcoholic beverages before or
during spa or hot tub use can cause drowsiness
which could lead to unconsciousness, and
subsequently result in drowning.
Pregnant women take note!
“Fresh water swimming pools and spas” include
systems that utilize saltwater chlorine generator
units, such as the Zodiac AquaPure
®
Electronic
Chlorine Generator. Please ensure that the salt
content of the pool/spa does not exceed
4500 ppm and water ow rate is within
30-70 gpm (110-265 lpm).
After installation, these
instructions must be given to
the homeowner or left on or
near the heat pump.
This manual contains
important information that
will help you in operating and
maintaining this heat pump.
Please retain it for future
reference.
To Next Page
Loading...
