Janome 4300QDC - Altering the Needle Drop Position; Altering the Stitch Length

29
(7.0)
(3.5)(0.0)
Altering the Needle Drop Position
The needle drop position can be altered for straight stitch
patterns 01-05 in mode 1 and 2 and 10-14 in mode 3.
Press the “–” sign on the stitch width adjusting key to
move the needle to the left.
Press the “+” sign on the stitch width adjusting key to
move the needle to the right.
q Stitch width adjusting key
Altering the Stitch Length
The stitch length can be altered.
Press the “+” sign on the stitch length adjusting key to
increase the stitch length.
Press the “–” sign on the stitch length adjusting key to
decrease the stitch length.
q Stitch length adjusting key
w Stitch length
NOTE:
Reverse stitch length cannot be set longer than 4.0.
q
w
w
+–
q
+–